Highpoint RocketRAID 2302 Guía de usuario descargar pdf (Pagina 61)

Linux Driver Support

1 - Red Hat Enterprise 4 Overview

This section provides instructions describing how to install and utilize the

RocketRAID host adapter on a Red Hat Enterprise 3 Linux system.

2 - Installing Red Hat Enterprise 4 (AS, ES, WS) Linux

on the RocketRAID 230x controller

To install Red Hat Enterprise Linux onto disks or RAID arrays attached to

RocketRAID host adapter:

Step 1 Prepare the Driver Diskette

The driver is provided in a floppy diskette image file format.

On a DOS or Windows system, a driver diskette can be generated using rawrite.exe.

This utility is included on the Red Hat Enterprise Linux CD (under /dosutils). Run

rawrite using a command prompt window, and follow the directions it provides.

On a Linux system, use the “dd” command to generate a boot diskette. Insert a

floppy disk into the floppy drive and type the following command:

# dd if= rr2310_00-rhel-4u4.img of=/dev/fd0

Step 2 Install Red Hat Enterprise Linux

Start installing Red Hat Enterprise Linux by booting from the installation CD.

At the “Welcome to Red Hat Linux” installation screen, a prompt labeled “boot:”

will appear at the bottom of the screen. Type in linux dd, then press Enter.

boot: linux dd

When prompted “Do you have a driver disk?”. Select “Yes”.

5-5

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 80 81

Sin comentarios

Highpoint RocketRAID 2302 Guía de usuario Pagina 61