Highpoint RocketRAID 4311 Guía de usuario descargar pdf (Pagina 20)

RocketRAID BIOS Utility

You will be asked to enter the Supervisor password.

The default password is “hpt”.

BIOS Commands

System

User/Supervisor modes – interface modes

Change password - for Supervisor mode

Exit the utility – quit and exit the RocketRAID BIOS utility

Disk

Information – displays information about the select hard disks

Initialize – initialize the selected disks (required in order to use new hard disks for

creating RAID arrays, disk replacement, or configuring spare disks.

Toggle Spare – configure spare disks.

Unplug – remove the selected disks (hot-swap)

Turn on write cache – enable write cache for the selected disks

Turn off write cache – disable write cache for the selected disks

Rescan – prompts the RocketRAID card to scan for new hard disks.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Sin comentarios

Highpoint RocketRAID 4311 Guía de usuario Pagina 20