Highpoint RocketRAID 3540 Guía de usuario descargar pdf (Pagina 14)

RocketRAID 3540 Hardware Description/Installation

2-3

3 - Verifying Installation

Once the RocketRAID 3540 host adapter and hard disks have been installed into the

chassis, boot-up the system to verify that the hardware is properly recognized.

1. Power on the system. If the system detects the presence of the adapter, the

RocketRAID 3540 BIOS Utility will be displayed during bootup.

2. Press Ctrl+H to access the RocketRAID 3540 BIOS Utility.

The BIOS Utility will display information about hard disks attached to the adapter.

1. Open the system chassis and locate an unused PCI-E x8.

2. Remove the PCI slot cover.

3. Gently insert the RocketRAID 3540 into the PCI-E slot, and secure the bracket to

the system chassis.

4. After installing the adapter, attach the Mini-SAS connectors to the RocketRAID

3540’s Mini-SAS port,and to chassis backplane. Each Mini-SAS cable supports

up to 4 hard disk drives. Consult the chassis’s manual for proper installation

procedures.

5. Close and secure the system chassis.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 80 81

Sin comentarios

Highpoint RocketRAID 3540 Guía de usuario Pagina 14