Highpoint RocketRAID 1640 Manual de usuario descargar pdf (Pagina 50)

4-18

ATA RAID Software

Assign a disk to the spare pool

If you need to assign a spare disk to an important array, select the Assign to Dedicated

Array option. Disk arrays that can utilize the spare feature will be then be displayed,

and listed on the drop-down menu towards the right hand side of the array list. When

an array is selected, the Available Disks list section will display all the single, physical

disks attached to the RAID controller. The Array Spares list will display the physical

disks that have already been set to act as spare disks.

The procedure can be repeated to add or remove additional spare disks.

4. Event Notification

Click on the Management tab, then select the Event Notification item from the menu.

The E-mail Notification window will appear. When an event occurs, the system will

send an E-mail to the preset mailboxes.

E-mail notification setting

In order to send and receive email, you must first configure the SMTP server. Click the

Settings button on the toolbar, or click on the Operation tab and select the Settings

option. The E-mail notification-setting window will be displayed. See the image

below:

Check the Enable E-mail option, and fill out the Mail From, SMTP server, and Port

fields with the appropriate information. Click OK to complete this procedure. The

system does not support user-validated SMTP server.

Add Recipient

Click on the Add button found on the toolbar, or click on the Operation tab and select

the Add Recipient option. This will open the Add Recipient window.

See the following page:

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 62 63

Sin comentarios

Highpoint RocketRAID 1640 Manual de usuario Pagina 50